Filter
Top Products
Busy Channel Lockout
BCL is used when CTCSS or DCS is
selected to prevent transmission when
the uh095sx detects a transmission from
another unit using the same CTCSS
or DCS code.
Press five times. Press or
to select ON. Press and hold
/ENTER to store the new setting.
BCL appears on the display when on.
If a button is not pressed within 10
seconds the uh095sx will automatically exit the Menu Mode.
13
UNIDEN Model uh095sx Dual Band (UHF CB/AM CB) Radio
Operation
MENU
VOX Operation (optional VOX headset required)
VOX is the automatic transmitting
function by inputting voice into
the VOX headset mic without
pressing the PTT key. Press
/ENTER four times. Press
or to select the desired
VOX sensitivity (oF, 1-9).
Press and hold /ENTER to
store the new setting. VOX
appears on the display when
select 1-9. Connect the optional
VOX headset.
If a button is not pressed within 10 seconds the uh095sx will automatically
exit the Menu Mode.
MENU
MENU
MENU