Filter
Top Products
[76] MULTI-HANDSET FEATURES
www.uniden.com
From the base to a handset
1) In standby mode, press find hs/intercom on the base.
2) All the handsets will be paged.
3) On the receiving handset, to answer the call, press talk/flash or intcom/hold.
Or press any number key,
*
/tone/<, or #/> (when Any Key Answer is on), or pick
up the handset from the cradle (when AutoTalk is on). To cancel intercom, press
find hs/intercom.
4) To hang up the intercom call, press end on the handset or find hs/intercom on
the base.
Call Transfer Feature
From handset to handset or to the base
1) During a call, press intcom/hold on the handset.
2) Select a handset or the base to transfer the call to
within 10 seconds.
To select the handset (or the base), press /vol/
∧ or
/vol/
∨ , and then press the OK soft key. If you select
All
, all other handsets and the base will be paged.
The call will automatically be placed on hold, and an intercom tone sounds.
To cancel the transfer, press talk/flash or speaker on the initiating handset.
3) To answer the page on a handset, press talk/flash, intcom/hold, or the ANSWER
soft key. If Any Key Answer is enabled, pressing a number key,
*
/tone/<, or #/> will answer the page. If AutoTalk is enabled, you can answer
the page by simply picking up the handset. To answer a page from the base, press
find hs/intercom or speaker.
4) To hang up the intercom call, press the END soft Key or end key on the handset.
*QNFVQVTCPUHGT
*CPFUGV
*CPFUGV
$#%- &'.'6' 1-
•If any you receive an
outside/intercom call
or page while selecting
the other handset (or
the base), the
operation will be
cancelled.
•If the party does not
answer within one
minute, the operation
is cancelled.
note
MULTI-HANDSET
FEATURES
TRU8880_1st.book 76 ページ ２００４年１月７日 水曜日 午後６時３０分