Filter
Top Products
54
Setting the Number of Rings
The ring time setting allows you to set the number of rings the caller hears before your answering machine plays the
outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable the Toll Saver (TS
setting), the answering machine picks up after two rings if you have new messages, and after four rings if there are
none. This way, if you make a long distance call to check your messages, you can hang up after the second ring to
avoid long distance billing charges.
From the base From the handset
Press [clock/menu] three times. The base
displays the current number of rings (2, 4, 6, or
TS for toll saver) and announces the setting.
Press [ /select] or [ /select] until the desired
ring time appears.
Press [set]. A conrmation tone sounds, and
the answering machine announces the new ring
time.
1)
2)
3)
Press the MENU soft key. Select the ANSW.
SETUP menu, and then the RING TIME
submenu.
Move the cursor to select a Ring Time (2 TIMES,
4 TIMES, 6 TIMES or TOLL SAVER).
Press the OK soft key. You will hear a
conrmation tone.
1)
2)
3)