Filter
Top Products
13
Wall Mounting the Base
This phone can be mounted on any standard wall plate.
Make the AC adapter and the telephone line cord through the hole on
the wall mount adapter.
Plug the AC adapter into the DC IN 9V jack.
Plug the telephone line cord into the TEL LINE jack.
Slide the wall mount adapter into the notches on the base.
Plug the AC adapter into a standard 120V AC wall outlet. Hook the cord
on the notch of the wall mount adapter.
Plug the telephone line cord into the telephone outlet. Hook the cord on
the notch of the wall mount adapter.
Align the mounting slots on the base with the mounting posts on the
wall. Then push in and down until the phone is rmly seated.
Note: DO NOT use an AC outlet controlled by a wall switch.
1)
2)
3)
4)
5)
6)
7)
To remove, push up
a tab on the wall
mount adapter as
shown.
To remove, push up
a tab on the wall
mount adapter as
shown.