Filter
Top Products
B. Connect the Base Unit and Charge the Handset
1) Connect the AC adapter to the
jack and to a standard 240V AC wall outlet.
2) Place the handset in the base unit.
3) Make sure that the LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is plugged in
and the handset makes good contact with the base charging contacts.
4)
To maximize the charge
capacity of your battery pack, DO NOT plug the telephone cord into the base
unit and wall jack until the battery is fully charged.
DC in 9V
charge/in use
Charge the handset battery pack for at least 15-20 hours before using
your new cordless telephone for the first time!
• Connect the AC adapter to a continuous
power supply.
• Place the base unit close to the AC
outlet so that you can unplug the AC
adapter easily.
The rechargeable battery is already installed in your phone.
!
!
Use only the
supplied
AAD--041S
AC adapter.
Do not use
any other AC
adapter.
Do not place
the power cord
where it
creates a trip
hazard or
where it could
become
chafed and
create a fire or
electrical
hazard.
[6]