Uniden SS E15 Cordless Telephone User Manual


 
[32]
Note on Power Sources
Low battery alert
Battery replacement and handling
When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions
in order to save power. If the phone is not in use, Low Battery appears on the LCD and none of the keys will
operate.
If the phone is in use, Low Battery flashes and the handset beeps. Complete your conversation as quickly as
possible and return the handset to the base unit for charging.
Even when the battery pack is not being used, it will gradually discharge over a long period of time.
For optimum performance, be sure to return the handset to the base unit after a telephone call.
When the operating time becomes short even after a battery is recharged, please replace the battery. With
normal usage, your battery should last about one year. Please contact your place of purchase or visit our
website for more information. www.uniden.com.au or www.uniden.co.nz
To avoid the risk of personal injury or property damage from fire or electrical shock, only use the
Uniden battery model and Uniden adapter model specifically designated for this product.
Information stored in the phone's memory will be retained for 30 minutes after the battery pack is
removed.
This includes all setup information, last number dialed, speed dial memory, Emergency Dial
programming, and the CID list.
Warning:
Power Failure
During the period that the power is
off, you will not be able to make or
receive calls with the telephone.
Caution
• Use only the specified Uniden battery pack (BT-905).
• Do not remove the battery from the handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.