Filter
Top Products
[35]
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first. If these
steps do not solve your problem, visit our website for further information (www.uniden.com.au or
www.uniden.co.nz).
Symptom Suggestion
The
LED won't illuminate
when the handset is
placed in
the cradle.
• Make sure the AC adapter is plugged into the cradle and wall outlet.
• Make sure the handset is properly seated in the cradle.
• Make sure the charging contacts on the handsets are clean.
• Move the handset and/ or main base away from metal objects or
appliances and try again.
• Press the key to help eliminate background noise.
• Make sure that the handset is not too far from the main base.
• Check both ends of the telephone line cord.
• Make sure the AC adapter is plugged into the main base and wall
outlet.
• Disconnect the AC adapter for a few minutes. Then reconnect it.
• Change the digital security code (see page 31).
• Make sure that the handset is not too far from the main base.
• Check the dialing mode used by your telephone company.
charge/ in use
delete/channel
The audio sounds
weak and/ or
scratchy.
Can't make or
receive calls.
ADDITIONAL INFORMATION