Filter
Top Products
2) Press the key to select .
3) Press the key to toggle and turn on Caller ID on Call Waiting.
4) Press the key and to complete the
setting. The handset returns to standby mode.
The Name Tag feature works with the Caller Display number from Caller ID. You must
subscribe to Caller ID service through your local telephone provider to use this feature.
There is usually a fee for this service. When the phone rings the caller display number,
when received will be compared to numbers stored in the dial memory. If there is a
match then any name stored with the dial memory number will be displayed (see page 21).
1) When the phone is in standby mode, press the
key. The following screen appears.
2) Press the key twice to select
.
3) Press the key to toggle Name Tag or .
4) Press the key to complete the setting.
The handset returns to standby mode.
volume/
return the handset to the base unit
/-
select
menu
menu
volume/ /-
select
menu
CIDCW
Name Tag
On Off
Setting Name Tag (POP ID)
[12]
Name Tag :On
Name Tag :On