Filter
Top Products
1 Snap the wall mount adapter into the
notches on the base.
2 Plug the telephone line cord to the
TEL LINE jack and the AC adapter to
the
DC IN 9V jack.
3 Plug the telephone line cord into the
telephone outlet.
4 Place the AC adapter cord inside the
molded wiring channel.
5 Plug the AC adapter into a standard
120V AC wall outlet.
Note Use only the Uniden AC
adapter supplied with
this phone.
6 Raise the antenna to a vertical
position.
7 Align the mounting slots on the base.
with the mounting posts on the wall.
Push in and down until the phone is
firmly seated.
47
Additional information
(continued)
Mounting the base unit on a wall
Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1
2, 3, 4,
5, 6, 7
EXAI 6980 2nd HEN 10/31/00 10:06 AM Page 47