Filter
Top Products
34
Using the answering machine
Setting the clock
The answering machine’s clock starts when the AC adapter cord is plugged in.
1 Press until you hear the
long beep.
2 First set the day by pressing
or .
When the number appears on the LED
display, press .
The unit announces the day
currently selected.
3 Next set the hour by pressing
or . When the correct
numbers appear in the LED display,
press .
4 Then set the minute by pressing
or . When the correct
numbers appear in the LED display,
press .
5 Lastly, set AM/PM by pressing
or . The LED display
will show A (AM) and P (PM) in turn.
At the correct one, press .
You will hear a long beep.
Then you will hear the new day and time.
Notes • You can hear the current time set by pressing .
• If a call comes in during clock setting, start over after the call.
• In case of power interruption, the clock stops. You must reprogram the
time once power is restored.
• If you begin to set the clock, and you pause for more than two minutes,
the unit returns to standby.
EXAI 6980 2nd HEN 10/31/00 10:06 AM Page 34