Filter
Top Products
36
Using the answering machine
(continued)
1 Press to change the status
from on to off. The LED display
indicates the change.
2 When the unit is turned on, it
initializes by playing the greeting.
If you want to stop playing, press
.
Turning the answering machine on and off
Check the LED display to see if the answering machine is on or off. If the LED display
is on, the unit is on and ready to take messages. If the LED display is off, it will not take
messages.
2 : 2 times
4 : 4 times
TS : In the TS (toll saver) position, if you
have new messages, the
answering system answers after
two rings. If there are no new
messages, the system answers
after four rings. This way, when
you call long distance to check your
messages, and have no messages,
you can hang up after the second
ring to save a charge.
Setting the number of rings
Choose one of three settings by sliding the RING TIME switch on the base unit to
one of the following positions:
EXAI 6980 2nd HEN 10/31/00 10:06 AM Page 36