Filter
Top Products
USING YOUR ANSWERING SYSTEM [46]
www.uniden.com
4) After the command has finished, you hear intermittent beeps indicating that the system is
in the command waiting mode. You may enter another command at this time from the
chart above.
5) When you are finished, hang up to exit the system. The answering system automatically
returns to standby.
Remote Operation
When you are away from home, you can operate your answering system with any touch-tone
telephone. Use this function to check for recorded messages, to play or delete messages,
even record a new greeting message.
1) Call your telephone number.
2) During the greeting message, press 0 and enter your PIN code (see page 32).
3) The answering system announces the current time and the number of messages stored in
memory. Then you hear "To play incoming message, press zero two.
For help, press one zero."
4) You may continue to listen to the voice prompts, or you may select a command from the
following chart:
For your convenience
remote operation cards
are provided for you to
use while away from
home (located in the
back of this manual).
Once you enter the
remote access menu,
you must enter a
command within 15
seconds, or the
answering system
automatically hangs up
and returns to standby.
tip
note
USING YOUR
ANSWERING SYSTEM
EXAI7248.book Page 46 Thursday, December 14, 2006 11:57 AM