Filter
Top Products
[31] SETTING UP YOUR ANSWERING SYSTEM
www.uniden.com
Setting the Time
The clock on the cordless phone’s answering system starts when power is supplied to the
base. Follow these steps to set the clock to the correct time.
1) With the phone in standby mode, press the menu/
clock key.
The system announces "Time" followed by the current
time and the instructions for setting the time.
2) Press the or /volume/select key until the
correct day is announced. The numbers [ ] through
[ ] are displayed on the base.
3) Press the set key to select the day.
4) Press the or /volume/select key until you hear
the correct hour setting. The numbers [ ] through
[ ] are displayed on the base.
5) Press the set key to select the hour.
6) Press the or /volume/select key until you hear the correct minute setting.
The numbers [ ] through [ ] are displayed on the base.
7) Press the set key to select the minute.
•Normally, the system
will return to standby
if it remains idle for 10
seconds after the or
/volume/select
key is pressed. For
setting the time,
however, the idle time
is extended to two
minutes.
•Press and hold the
or /volume/select
key to quickly scroll
through the numbers
on the display.
note
SETTING UP YOUR
ANSWERING SYSTEM
EXAI7248.book Page 31 Thursday, December 14, 2006 11:57 AM