Filter
Top Products
ADDITIONAL INFORMATION[ 40 ] www.uniden.com
Symptom
Severe noise interference.
The answering system does
not work.
The answering system does
not answer calls.
Messages are incomplete.
After a power failure,
the outgoing message is
deleted.
No sound on the base unit
speaker during call
monitoring or message
playback.
Suggestion
• Keep the handset away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
• Make sure the base unit is plugged in.
• Make sure the answering system is turned on.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
• The incoming messages may be too long. Remind callers to leave a
brief message.
• The memory may be full. Delete some or all of the saved messages.
• Record your personal outgoing message again. The default message should
remain.
• Adjust the speaker volume on the base unit.
EXA3245.Qx 1/27/3 10:00 AM Page 40