Filter
Top Products
ADDITIONAL INFORMATION [ 39]www.uniden.com
ADDITIONAL
INFORMATION
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
The charge/in use LED won't
illuminate when the handset
is placed in the base.
The audio sounds weak
and/or scratchy.
Can't make or receive calls.
The handset doesn't ring or
receive a page.
Suggestion
• Make sure the AC adapter is plugged into the base and wall outlet.
• Make sure the handset is properly seated in the base.
• Make sure the charging contacts on the handset and base are clean.
• Make sure that the base antenna is in a vertical position.
• Move the handset and/or base to a different location away from metal
objects or appliances and try again.
• Press the channel key in the Talk mode to help eliminate background
noise.
• Make sure that the handset is not too far from the base.
• Check both ends of the telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Change the digital security code (See page 37).
• Make sure that the handset is not too far from the base.
• The battery pack may be weak. Charge the battery for 15-20 hours.
• The handset may be too far from the base unit.
• Place the base unit away from appliances or metal objects.
• Change the digital security code (See page 37).
EXA3245.Qx 1/27/3 10:00 AM Page 39