Filter
Top Products
When the handset battery pack is fully
charged, after 15-20 hours of charging,
plug the telephone cord into the base
unit and then into a telephone wall jack.
Your phone is set for tone dialing.
If your local network requires pulse
dialing, please see “Choose the dialing
mode” on page 11.
A
C
B
Remove the cover.
To record a personal outgoing greeting
to callers, please see page 29.
Connect the
battery pack
connector with
the correct
polarity.
Replace the cover.
To turn the
answering system
on, press the answer
on/off/ key.
A pre-recorded
greeting will play
and your system
is ready to
accept calls.
find hs
answer on/off delete
charge/in use
Digital Answerer
clock/menu
mic
set
select/volume
memo rec greeting ringer
Step 1 Checking the Package Contents
Make sure you have received the following
items in the package. If any of these
items are missing or damaged, contact
the Uniden Parts Department.
Uniden Parts Department at
(800) 554-3988
Hours: M-F 8:00 a.m. to 5:00 p.m. CST.
We can also be reached on the web at
www.uniden.com
•Base unit
•Handset
•AC adapter
•Rechargeable
battery
•Telephone cord
•Wall mount
adapter
•This Owner’s
Manual
•Other Printed
Material
Step 2
Install and Charge the Handset Battery
Step 3 Connect to Phone Line
D
Plug the AC adapter cord into
the base unit and then into
a 120V AC outlet.
E
Place the handset on the base
and charge continuously for 15-20
hours before using the phone.
Step 4 Set Answering System
QUICK REFERENCE GUIDE
QUICK REFERENCE GUIDE [ 1]www.uniden.com
EXA3245.Qx 1/27/3 9:59 AM Page 1