Filter
Top Products
Multi-Handset Features
[83] Multi-Handset Features
www.uniden.com
Multi-Handset Features
The features in this section require a minimum of two handsets to operate. To add
additional handsets to your system, see "Expanding Your Phone" on page 12.
Using DirectLink Mode
In DirectLink Mode, a pair of handsets
can function as two-way radios.
DirectLink Mode does not interfere with
the main base's ability to make or receive
telephone calls. You must set both
handsets to DirectLink Mode to make a
directlink call.
To enter DirectLink mode, Select Direct
Link option in the main menu. And then
press the ENTER soft key.
DirectLink
Mode complete.
appears when you enter
the DirectLink Mode.
To make a DirectLink call, press the DirectLink soft key. Select the
handset you want to call. To cancel the call, Press end. To answer
a DirectLink call, press talk/flash or on the side of the handset.
Press end when you want to hang up.
To exit DirectLink mode and be able to receive normal phone
calls again, press the CANCEL soft key, and then press the OK
soft key.
5'.'%6
&KTGEV.KPM
•If the party is out of
range,
No Signal
appears in the display,
and the operation will
be canceled.
•While a pair of
handsets are in
DirectLink mode, they
cannot be used to
make or receive calls.
Other handsets can
still make and receive
calls.
note