Filter
Top Products
44
Intercom
Making an Intercom Page
You can use the intercom to talk to another station without using the phone line.
With the phone in standby, press [int’com/hold].
Use [ ] or [ ] to select the handset you want to talk with, and then press the OK soft key. If you select ALL,
all other registered handsets will be paged. An intercom tone sounds. To cancel intercom, press [ ] on either
handset.
Answering an Intercom Page
When the intercom page tone sounds, the display will show the ID of the station that is
paging.
Press [ /ash], [int’com/hold], or the ANSWER soft key. Or press a number key,
[
tone
/<], or [#/>] (when Any Key Answer is enabled), or pick up the handset from
the cradle (when AutoTalk is on).
To hang up an intercom page, press the END soft key or [ ] on either handset.
Note:
If the party is busy, the handset returns to standby.
If the party is out of range, UNAVAILABLE appears in the display and the operation will be canceled.
If you receive an outside or intercom call or page while selecting the other handset, the operation is canceled.
If you do not select a handset within 30 seconds, the operation will be canceled.
If the party does not answer within one minute, the operation is canceled.
1)
2)
1)
2)
•
•
•
•
•
+PVGTEQO
㨬㨬
*CPFUGV
#059'4
+PVGTEQO
㨬㨬
*CPFUGV
#059'4