Filter
Top Products
[43]
Simple solutions
The most common problems often have the
simplest solutions. We hope that you will not
experience any problems with your product, but in
the event that you do, this section hopes to help
you overcome any problems quickly and with
minimum effort.
First, check that:
• the telephone line cord is correctly connected.
• the power cord is correctly connected
and switched on.
• the battery pack is charged and not in need of
replacing.
If you have more than one handset registered
to your base, remember to check the
connections on this too.
If you are still experiencing problems, please try
the following or feel free to contact our
customer service center. See back cover page
for contact information.
Handset/Base
No dial tone
• Is the handset registered to the base?−
see page 27.
• Is the symbol flashing and can you hear a
beep during a call?− if so, move closer to the
base as you are out of range.
Cannot dial out
• Is symbol displayed?− if so the keypad lock
is on, see page 16.
Handset does not ring
• The ringer volume may be set to off,
see page 20.
• Is the symbol flashing?− if so, move closer
to the base as you are out of range.
UC01501BB_0 8/9/06 2:50 PM Page 43