[40]
Ring Delay
You can set the answering machine to pick up a
call after 10sec, 20sec, 30sec or Toll Saver.
For Toll Saver, the call is answered after 10sec if
there are new messages and 30sec if there are no
new messages.
To set the ring time, use or to select
Ring Delay
. Press . Select the desired ring
delay option and press .
Message Length
You can set the record length for incoming
messages from 1 minute or 4 minutes or set to
Announce only.
Announce only means only the OGM is played.
To set the message length use or to
select
Msg. Length
.
Press . Select the desired message length
option and press .
Setting Remote PIN
You must set a 4 digit PIN to enable remote
access from an outside line.
To set the Remote PIN use or to select
Remote PIN
. Press . Enter a 4 digit PIN and
press .
Message Alert
To set the base to beep when there is a new
message use or to select
Msg. Alert
.
Press . Select the desired On or Off option
and press .
Language
To select the answering machine language, use
or to select
Language
.
Press . Select
English
or
Español
.
Press .
UC01501BB_0 8/9/06 2:50 PM Page 40