Filter
Top Products
If the base already has the maximum number of
handsets (6) registered to it you will need to de-
register one of the existing handsets before you
can register the new handset.
See section for de-registering handsets.
On the handset you want to register:
Enter the base PIN code.
Pre-set base PIN code is 0000.
You will hear a confirmation tone when
registration is complete.
When in standby, the new handset number will be
displayed.
The handset will automatically be allocated with
the next available handset number.
If registration is unsuccessful, the display will
show
Not Registered
and you will need to
follow the registration procedure again.
De-register a handset or a base
If you have more than one handset registered to
your base or more than one base registered to your
handset(s), you can de-register both the handset
from the base or the base from the handset.
Before registering, make sure all handsets and the
base are in standby.
1 Press to access the main menu.
2 Press or until
Add. Settings
is
displayed and press .
3 Press or to display
Deregister
and press .
4 Press or to select
Handset
or
Base
and press .
5 Press or to display the handset or
base you want to de-register and press .
6
Press or to select Yes and press .
If the handset registers to the base successfully,
you will hear a confirmation tone.
7 Press to exit and return to standby.
[28]
UC01501BB_0 8/9/06 2:49 PM Page 28