Filter
Top Products
THE INTEGRATED ANSWERING DEVICE [ 53]
THE INTEGRATED
ANSWERING DEVICE
• If you press
ringer/vol ▲ in the
maximum volume level
(10) or ringer/vol ▼
in the lowest volume
level (1), you will
hear a beep.
• Press and hold
ringer/vol
▲ or ▼
on the base to scroll
quickly through the
volume levels.
Adjusting the speaker volume level
When the base speaker is in use, press ringer/vol ▲ or ▼ on the base to adjust the
volume. Press ringer/vol
▲ for louder or ringer/vol ▼ for softer.
The numbers 1-10 appear on the base indicating the volume levels. 1 being the softest
and 10 being the loudest.
Using the menu mode
The Menu mode allows you to set the following Answering System functions.
• To scroll through the menu options, repeatedly press
CLOCK/MENU on the base in the standby mode.
The system returns to standby after the last menu
option. A confirmation tone sounds to indicate the
standby mode.
• If you press , the operation is canceled.
• If the system remains idle for about 5 seconds after the
announcement, the system returns to standby.
Once /SELECT or /SELECT is pressed, the idle
time is extended to 10 seconds.
• If there is an incoming call, the operation is canceled.
• When you have completed the setting, press to exit
the menu mode, or CLOCK/MENU to move to the next
menu option.
• You can also set these menus from the handset. See
“Answering System Setup” on page 27 for instructions.
For your convenience, voice prompts will guide you
through the menu setup mode.
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
CLOCK/MENU
DCT5280_UP302BH UP01302BA_1 5/23/03 1:56 PM Page 53