Filter
Top Products
GETTING STARTED [ 23]
GETTING STARTED
Entering the Menu
1) Press the MENU soft key in the standby mode.
2) Press volume/
▲ or ▼ to move the pointer to a
desired main menu (DirectLink Mode, Handset Setup,
Answ. Setup, Global Setup, and System Reset).
3) Press the OK soft key to enter the menu. To return to
the previous screen, press the BACK soft key.
4) Use volume/
▲ or ▼ to select a desired submenu,
then press the OK soft key to enter.
In the submenu, volume/
▲ or ▼ is used to select an
item. Press the OK soft key to confirm your setting. To return to the previous screen,
press the BACK soft key. For detailed instructions, see the following sections for the
desired submenu.
5) To exit the menu, press the end key.
• If any of the following occurs during the menu operation, the operation will be cancelled.
- Press the end key.
- Press talk/flash or speaker.
- Charge the handset.
- Receive an outside/intercom call.
• If the handset remains idle for 30 seconds, the phone will return to the standby mode.
MENU
SUN 12:00A
Handset #1
New: 5
MENU CID
RDL
PB
DirectLink Mode
Handset Setup
Answ. Setup
BACK OK
Setting up the Menu
For Answering Setup
menu, you can also
set them from the
base (see page 53).
DCT5280_UP302BH UP01302BA_1 5/23/03 1:55 PM Page 23