Uniden DCT5280 Cordless Telephone User Manual


 
PHONEBOOK [ 39]
PHONEBOOK
3) Press the STORE soft key, Store/Edit Name appears.
4) Enter the name (up to 16 characters) by using the
number keypad (see the Steps for Entering Names and
Special characters on page 40).
If a name is not required, go to step 5. <No Name> will
be used as the name.
5) Press the OK soft key to store the name,
Store/Edit No. appears.
6) Press the number keypad to enter the phone number (up
to 20 digits), press the OK soft key to store the number.
7) Distinctive Ring appears. Press volume/
or
to move the pointer to one of the Distinctive Ring
options, then press the OK soft key.
8) Speed Dial appears. Press volume/ or to
move the pointer to select the Speed dial location
(10 locations: SPD1-SPD0).
9) Press the OK soft key. You will hear a confirmation
tone and Done! appears in the display.
If you choose not to store a Distinctive Ring,
simply select the No Selectn option.
If you choose not to store the name/number as a Speed
Dial, simply select the No Selectn option.
Store/Edit Name
BACK DELETE OK
Movies
Store/Edit No.
DELETE PAUSE OK
8007303456
Distinctive Ring
No Selectn
Flicker
BACK OK
Speed Dial
No Selectn
SPD1:<Empty>
BACK OK
Movies
800-730-3456
Flicker /SPD2
BACK DELETE EDIT
Selecting a speed
dial location where a
number is already
stored, releases the
old numbers speed
dial setting. The new
number will be
stored in the speed
dial location.
When the memory is
full, you will hear a
beep and Memory
Full appears. You
cannot store names
and numbers.
The pause key counts
as one digit. Pressing
the PAUSE soft key
more than once
increases the length
of the pause between
numbers. Each pause
replesents a 2
second delay.
DCT5280_UP302BH UP01302BA_1 5/23/03 1:56 PM Page 39