Filter
Top Products
EXPANDING YOUR PHONE[ 38 ]
Setting up
Charging
• Charge the second handset for 15-20 hours before using.
• When you charge the second handset, the display shows the name of the handset, HS2.
Dialing mode
Dialing mode is a universal setting. When the mode is changed on the original handset,
the setting for the second handset is changed as well.
CIDCW
• CIDCW setting is a universal setting. When the setting is changed on the original
handset, the CIDCW setting for the second handset is changed as well.
• CW Deluxe setting is independent from the original handset. To set the CW Deluxe setting
on the second handset, do the following.
1) When the phone is in the standby mode, press menu/mute.
2) Press - or + to move the pointer to “Caller ID Setup”, then press select/ch.
3) Press - or + to select “CW Deluxe”, then press select/ch.
4) Press - or + to select “CW Deluxe On” to active CW Deluxe features,
then press select/ch.
Registration
For the TRU446-2 handset No.2, you can use it with the TRU446-2 base without
registering the handset. However, you need to register the TRU446-2 handset No.2 each
time you change the digital security code of the original base. Follow the instructions
under “Registering the Second Handset” on page 36.
Second Handset Operation
TRU446_OM 4/9/02 10:44 AM Page 38