Uniden TRU 440 Series Cordless Telephone User Manual


 
EXPANDING YOUR PHONE[ 36 ]
How to Distinguish the Original Handset
and the Second Handset
The original handset and second handset are identical in appearance. To distinguish the
original and second handset, charge the handset on the base. If you charge the second
handset, HS2 appears, otherwise HS1 appears. There are some restrictions on the second
handset, see Second Handset Operation on page 38.
Your phone supports up to 2 handsets (the original handset and the second handset). You
can now place a fully featured cordless handset anywhere AC power is available to connect
the handset charger. Additionally, you can transfer an outside call to another handset.
Expanding Your Phone
We refer to the TXC400 handset and the TRU446-2 handset No.2 as the second handset, and the
TRU446 handset and TRU446-2 handset No.1 as the original handset in this section.
Before use, you need to charge the battery pack for at least 15-20 hours, and for the TXC400
handset, register the handset.
Registering the Second Handset
You need to register the second handset before using (for TXC400 only). To register the
second handset, simply place the second handset on the original base until you hear a
confirmation tone. You will need to re-register the additional handset each time you
change the digital security code of the original unit.
If you did not hear the confirmation tone, please register the additional handset again.
TRU446_OM 4/9/02 10:44 AM Page 36