Filter
Top Products
EXPANDING YOUR PHONE[ 46 ]
How to Distinguish the Original Handset
and the Second Handset
The original handset and the second handset are identical in appearance. To distinguish
the original and the second handset, place the handset in the base charger. If you charge
the second handset, HS2 appears, otherwise HS1 appears. There are some restrictions on
the second handset, see “Second Handset Operation” on page 48.
Your phone supports up to 2 handsets (the original handset and the second handset). You
can now place a fully featured cordless handset anywhere AC power is available to connect
the handset charger. Additionally, you can transfer an outside call to another handset.
Expanding Your Phone
• We refer to the TXC146 handset as the second handset, and the EXT1460 handset as the
original handset in this section.
• Before use, you need to charge the battery pack for at least 15-20 hours, and register
the TXC146 handset.
Registering the Second Handset
You need to register the second handset before using. To register the second handset,
simply place the second handset on the original base with the keypad either facing up or
down, until you hear a confirmation tone. If the EXT1460 base is wall mounted, place the
second handset on the EXT1460 base with the keypad facing up. Remove the beltclip, if
attached. You will need to re-register the second handset each time you change the
digital security code of the original unit.
• If you did not hear the confirmation tone, please register the additional handset again.
• If you place the second handset with the keypad facing forward, remove the beltclip, if attached.
EXT1460 (ENG)-05/16 5/16/02 1:44 PM Page 46