Filter
Top Products
GETTING STARTED [ 13 ]
INSTALLING AND
ADJUSTING
GETTING STARTED
C. Connect the base unit
1) Snap the desktop stand into the notches on the base.
You can lay the phone flat or put the phone on a slant.
To lay the phone flat To put the phone on a slant
2) Connect the AC adapter to the DC IN 9V jack and to
a standard 120V AC wall outlet.
1 Align marks on the stand and
the base, then insert the tabs into
the slots.
2 Press down on the stand clips and
insert them into the slots.
1 Align marks on the stand and the
base, then insert the stand into the slots.
2 Tilt down the stand so that the tabs click
into the slots.
EXT1460 (ENG)-05/16 5/16/02 1:44 PM Page 13