Uniden EXT 1480 Cordless Telephone User Manual


 
GETTING STARTED[ 14 ]
Place the power cord so
that it does not create
a trip hazard or where
it could become chafed
and create a fire or
electrical hazard.
Use only the supplied AD-312 AC adapter.
Do not use any other AC adapter.
Connect the AC adapter to a continuous power supply.
Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
After installing the battery pack in the handset, charge your handset at least 15-20
hours before plugging into the phone line. Once the handset battery pack is fully
charged, connect the telephone line cord to the base and telephone wall outlet.
6) Connect the telephone line cord to the TEL LINE jack and
to a telephone outlet once the handset is fully charged.
If your telephone outlet isn't
modular type, contact your telephone
company for assistance.
Modular
3) Set the base on a desk or tabletop, and place the handset in the
base unit as shown.
4) Raise the antenna to a vertical position.
5) Make sure the
status/voice mail LED illuminates. If the LED
does not illuminate, check to see that the AC adapter is plugged
in and that the handset makes good contact with the base
charging contacts.
EXT1460 (ENG)-05/16 5/16/02 1:44 PM Page 14