Filter
Top Products
[ 27 ]
BASICS
Find Handset
Flash and Call Waiting
BASICS
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the phone’s
channel for clear operation. This function works only when the phone is in use.
Press select/chan. “Scanning” appears on the display, indicating the phone is changing
to another channel. For more information on interference, refer to “Radio Interference” on
page 56.
• You must subscribe
through your local
telephone company
to receive Call
Waiting Service.
• If the handset
battery is
completely drained,
the handset will not
beep when paging.
To locate the handset, press page on the base. The handset beeps for
60 seconds, and “Paging” appears on the display.
Paging is canceled when pressing any key on the handset or page on the
base. Additionally, if you receive an incoming call, page is canceled.
If you have Call Waiting service and a call waiting tone sounds while you
are on a call, press talk/call wait to accept the waiting call. There is a
short pause, then you will hear the new caller. To return to the original
caller, press talk/call wait again.
EXT1460 (ENG)-05/16 5/16/02 1:44 PM Page 27