Filter
Top Products
• If you press end or
don’t press a key
within 30 seconds
while in the storing
operation mode, the
phone will return to
the standby mode.
• When the memory is
full, you will hear a
beep and “
Memory
Full
” appears. You
cannot store names
and numbers.
• The pause key counts
as one digit. Pressing
redial/pause more
than once increases
the length of pause
between numbers.
PHONEBOOK[ 30 ]
Phonebook allows you to dial a number using just a few key presses.
Your phone stores names/numbers in the phonebook memory location, and you can search
names in alphabetical order. You have a total of 100 locations that can be used for the
phonebook (including the Speed dials) and Caller ID messages.
Storing Phone Numbers, Names, Distinctive
Rings, and Speed Dial
1) When the phone is in the standby mode, press phonebook/<<. The handset displays the
number of the phonebook locations used, and information on searching and storing
phonebook locations.
(1st line) the number of the phonebook locations used
(2nd line) How to search (the number keypad, + or -/ )
(3rd line) How to enter the storing operation (press select/chan)
2) Press select/chan, then “Store/Edit Name” appears.
3) Store the name (up to 16 characters) by using the number keypad.
• See the “Steps for entering names and special characters” (see page 31).
• Use cid/>> and phonebook/<< to move the cursor to the desired location.
• Use delete/transfer to delete characters as needed.
• Press and hold delete/transfer to delete all the characters.
If a name is not required, go to step 4.
4) Press
select/chan to store the name, then
“Store/Edit No.” appears.
5) Press the number keypad to enter the phone number (up to 20 digits),
then press select/chan to store the number.
If you get an incoming call, a transferring call, or page, the operation is canceled.
Phonebook
EXT1460 (ENG)-05/16 5/16/02 1:44 PM Page 30