Filter
Top Products
Note on Power Sources
[75] Note on Power Sources
www.uniden.com
Install the optional power backup battery in the base
The battery backup allows you to make and receive calls
during a power failure. You can use any handset or the
base, just as you would normally.
1) Open the battery case cover by pressing in slightly on the
right side of the base as shown.
2) Place the battery pack in the battery compartment with the
connectors on the battery and on the compartment aligned.
3) Push the battery compartment back in.
Caution
•
Use only the specified Uniden battery pack (BT-0003).
•
Do not remove the batteries from the handset to charge them.
•
Never throw the battery into a fire, disassemble them, or heat them.
•
Do not remove or damage the battery casing.
• appears in LCD as
a warning that the
backup battery pack is
NOT installed in the
base unit.
•To use the backup
battery Feature you
need to connect the AC
adapter to the base,
and charge the base
battery for at least 24
hours.
•Use only the Uniden
(BT-0003) rechargeable
battery pack. The
battery may be
purchased by calling
Uniden's Parts
Department (see back
cover page).
note