Filter
Top Products
Using Your Phone
Using Your Phone [46]
www.uniden.com
Tone Dialing Switch Over
If your telephone company uses pulse dialing, you can
switch over to tone dialing after the call connects. This
feature is useful when you need tone dialing to use any
automated menu systems, such as automated banking,
prescription refill lines, customer support menus, etc.
If your phone is set to pulse dialing mode, make your call
normally. Once your call connects, press
*
/tone on the
handset or base. Any digits you enter from then on will be sent as tone digits.
When this particular call ends, the phone automatically returns to pulse dialing
mode.
Privacy Mode
Privacy mode prevents interruption from other registered
handsets or the base. This works only when the phone is in use.
While on a call, press the OPTIONS soft key on the handset or
base. Use the joystick or the up/down key to select
Call
Privacy
.
Privacy Mode On
appears in the display. To exit Privacy
Mode, use the same procedure.
Privacy Mode Off
appears.
Find Handset
To locate the handset, press end/find handset. on the base
when the phone is in standby mode. Select the handset to
page. The handset beeps for 60 seconds, and
Paging
appears
on the handset display. To cancel paging, press any key on
the handset or end/find handset on the base.
126+105126+105
6CNM
2TKXCE[/QFG1P