Filter
Top Products
Expanding Your Phone
Expanding Your Phone [12]
www.uniden.com
Connect the expansion handset's charger
The handset is powered by a rechargeable
battery pack. The battery recharges
automatically when the handset is placed
in the charger.
1) Connect the AC adapter to the DC IN 9V jack
and to a standard 120V AC wall outlet.
2) Set the charger on a desk or tabletop, and
place the handset in the charger with the
handset facing forward.
3) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see
that the AC adapter is plugged in and the
handset makes good contact with the
charger charging contacts.
4) Charge the handset battery pack for at least
15 hours before using your new cordless
telephone for the first time.
Register the Handset
Handsets supplied with the phone are registered to the base by the factory. Pre-
registered handsets display a handset ID number. Handsets that have not been
registered display
MUST place the handset in base to register! Models may vary,
refer to Owners Manual for help.
in the LCD. When you register an extra handset
to the base, the handset ID will be assigned. Only one handset can be registered at
a time.
•Use only the supplied
AD-0005 AC adapter.
Do not use any other
AC adapter.
•Your phone may be
compatible with other
Uniden 5.8Ghz Digital
Expandable Systems.
Look for the technology
icon on our boxes or
visit our website for a
list of compatible
models.
note