Filter
Top Products
Multi-Handset Features
Multi-Handset Features [70]
www.uniden.com
Multi-Handset Features
The features in this section require a minimum of two handsets to operate. To add
additional handsets to your system, see "Expanding Your Phone" on page 11.
Using DirectLink Mode
In DirectLink Mode, a pair of handsets
can function as two-way radios.
DirectLink Mode does not interfere with
the base's ability to make or receive
telephone calls. You must set both
handsets to DirectLink Mode to make a
DirectLink call.
To enter DirectLink mode, select Direct
Link option from the main menu. And
then press the ENTER soft key.
Direct
Link Mode complete.
appears once the
selection is confirmed.
To make a DirectLink call, press the DirectLink soft key. Select
the handset you want to call. To answer a DirectLink call, press
talk/flash or if Any Key Answer is on, press any number key,
*
/
tone or # key. Press end when you want to hang up.
To exit DirectLink mode and be able to receive normal phone
calls again, press the CANCEL soft key, and then press the OK
soft key.
5'.'%6
&KTGEV.KPM
•If the party is out of
range,
No Signal
appears in the display,
and the operation will
be canceled.
•While a pair of
handsets are in
Intercom or DirectLink
mode, they cannot be
used to make or
receive calls. Other
handsets can still make
and receive calls.
note