Filter
Top Products
Answering Machine
Answering Machine [68]
www.uniden.com
Remote Operation
You can check, play, or delete messages when you are away from home. You can also
record your own personal greeting. To access your answering machine remotely, you
need a touch tone telephone and a two-digit security code (see Setting a Security
Code on page 59).
1) Call your telephone number and wait for the system to answer. If Toll Saver is
enabled, the answering machine will answer in 2 rings if you have new messages
or 4 rings if you have none. If the answering machine is off, it will answer after
about 10 rings and sound a series of beeps.
2) During the greeting message (or a series of beeps when the answering machine is
off), press 0 and enter your security code within two seconds.
3) The answering machine announces the current time and the number of messages
stored in memory. You hear "To play incoming messages, press zero-two. For
help, press one-zero." Then, you hear a beep.
4)
Enter a command from the following chart within 15 seconds. After the first
command, you have two seconds to enter each command.
•The system will only
play back messages for
four minutes and then
it returns to the
command waiting
mode.
•To continue playing
your messages, press 0
then 2 again within 15
seconds.
•If you enter an
incorrect security code
three times, you will
hear a beep and the
system will return to
standby.
•For your convenience,
a remote operation
card is provided for
you to use while away
from home (refer to
page 88).
note