Ultratec Miniprint 425 Telephone User Manual


 
Important safety instructions
When using your Miniprint 425, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury to persons.
Save these instructions!
General safety
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the
Miniprint 425.
3. Unplug the Miniprint 425 from the wall outlet before
cleaning. Do not use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
4. Do not use the Miniprint 425 near water, for example, near
a bath tub, wash bowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
5. Do not place the Miniprint 425 on an unstable cart, stand,
or table.The Miniprint 425 may fall, causing serious
damage to the TTY.
6. The Miniprint 425 should be operated only from the type
of power source indicated on the marking label. If you are
not sure of the type of power supply to your home,
consult your dealer or local power company.
7. Do not allow anything to rest on the power cord. Do not
locate the Miniprint 425 where the cord will be abused by
persons walking on it.
8. Do not overload wall outlets and extension cords.This
overloading can result in a fire or electric shock.
9. To reduce the risk of electric shock, do not disassemble
the Miniprint 425, but take it to a qualified service person
when service or repair work is required. Opening or
removing covers may expose you to dangerous voltages or
other risks. Incorrect re-assembly can cause electric shock
when the Miniprint 425 is subsequently used.
10.Avoid using a telephone (other than a cordless type)
during an electrical storm.There is a remote risk of
electric shock from lightning.
IMPORTANT SAFETY INSTRUCTIONS • 3