Filter
Top Products
Setting pulse/tone dialing
The Miniprint 425 is set for tone dialing, which is correct for
almost all telephone lines. But you can change to pulse
dialing if your line does not accept tone dialing.This setting
remains changed until you change it again or reset the
Miniprint 425 or you lose power. Follow these steps to set
pulse dialing:
1. Press the options key ( + ).You will see PRINT
(UP/LOW) CASE on the display.
2. Press the key until you see USING ( TONE) DIAL on
the display.
3. Press the to change the option.
4. Press the key to save the new setting and leave
options or press the key to save and go to the next
option.
Setting the number of auto-answer
rings
Follow these steps to change the number of auto-answer
rings to any number between 2 and 9:
1. Press the options key ( + ).You will see PRINT
(UP/LOW) CASE on the display.
2. Press the key until the display says AUTO ANSWER
RING (2).
3. Press the to choose a number between 2 and 9.
4. Press the key to save the new setting and leave
options or press the key to save and go to the next
option.
Turning off Turbo Code
Follow these steps to turn off Turbo Code:
1. Press the options key ( + ).You will see PRINT
(UP/LOW) CASE on the display.
3Ctrl
Return
Esc
Spacebar
Return
3Ctrl
Return
Esc
Spacebar
Return
3Ctrl
26 • OPTIONS