Replacing the printer paper
The printer uses high-quality thermal paper. Use the order
card that comes with the Miniprint 425 to order paper. If you
do not have a card, contact your dealer or Ultratec (the
Ultratec address is on the inside front cover of this manual).
Turn on the Miniprint 425 and be sure the printer is on, then
follow these steps to put in a new roll of paper:
30 • CARE & REPAIR
Take off the
printer cover by
pushing in on the
back and lifting
up.
Hold the new roll
so that it unrolls
from the bottom.
Feed the end into
the slot in the
back of the
printer.
Press the
key a few times
until the paper
comes out of the
top of the
printer. Pull the
paper up gently.
Return
Feed the paper
through the slot
in the printer
cover.
Put the roll in
the holder
behind the
printer. Replace
the printer cover.