Toshiba DKT2304-CT Cordless Telephone User Manual


 
Handset Operation
Making a Call
30 Strata CIX and CTX DKT2204-CT/DKT2304-CT Cordless Digital Telephones
Making a Call
Note If you are talking on a call and you have reached the range limit, move back in
range within 35 seconds or the call is dropped. This guide assumes that F1 is an
extension key (PDN) and F2 is an outside line key.
Internal Call
1. Pick up the handset and press F1. The message ACQUIRING LINK” displays
on the LCD.
If the connection is made between the handset and base,
you will see the current volume setting (shown right) for
approx. two seconds. The
F1 LED turns on.
If the connection is not made or the handset is at the
range limit of the DKT2204-CT/DKT2304-CT, the
message “
NO SERVICE” displays.
2. When you hear a dial tone, enter the number you are calling. The numbers display
on the LCD.
3. When you finish the call, press the
Talk button, this hangs up the telephone and
puts it in Auto Standby.
External Call
1. Press F2. The handset starts to establish a connection with the base unit.
If the connection is made between the handset and base, you will see the current
volume setting for approx. two seconds. The
F2 LED turns on.
2. When you hear a dial tone, enter the number you
are calling. The numbers display on the LCD
(shown right).
3. When you finish the call, press the
Talk button,
this hangs up the telephone and puts it in Auto
Standby.