Filter
Top Products
Installation
Step 6: (Optional) Wall Installation
22 Strata CIX and CTX DKT2204-CT/DKT2304-CT Cordless Digital Telephones
DKT2304-CT
1. Insert two mounting screws 1-1/5 inches apart.
Allow about 3/16 of an inch between the wall and
screw heads for mounting the telephone (shown
right).
2. Pass the one end through the hole of the wall mount
stand and plug it into the charging unit. Wrap the AC
adapter cord around the strain relief.
3. Slide the wall mount stand into the notches on the
bottom of the charging unit.
4. Place the charging unit on the posts of the
wall screws and push down until it’s firmly
seated (shown right).
5. Plug the AC adapter into a standard 120VAC
wall outlet.