Filter
Top Products
Setting System Parameters
Speed Dial—Advanced Features
Strata DK System Administrator Guide 5/00 31
➤ To use the new link
➤ From any station, press
6SHHG'LDO+
or press 6' () button if
available on the calling station. The telephone automatically dials
to access a
CO line, then the carrier access code (
) plus the telephone number
(
).
Speed Dial Memo
This feature enables the Administrator station to program an 11- or 12-character name
for each of the system Speed Dial numbers. You can scroll through the memo pad of
names to select the appropriate party.
Notes
● Before entering names for Speed Dial Numbers, turn off the Soft Key feature by
pressing
0RGH + when the telephone is idle. After entering the names, turn
the feature back on by pressing the
0RGH + when the telephone is idle.
● For your convenience, use the “Telephone Location Record” on Page 45 for
recording speed dial numbers with memos from the Administrator station.
➤ To program names and numbers
1. Press 5HGLDO, then
6SHHG'LDO.
The LCD displays:
2. Enter the Speed Dial
number.
The current name/memo and its code displays (see
Table 8 on Page 42).
3. Press
0RGH. The name/memo appears as you enter it.
#* NNN SPEED DIAL