Filter
Top Products
Setting System Parameters
Station Relocation
Strata DK System Administrator Guide 5/00 15
Automatic Relocation
This function enables you to physically move a telephone from one location to another
while maintaining all of the telephone’s programmed features. Use the “Telephone
Location Record” on Page 45 for telephone location tracking.
➤ To turn on the Auto Station Relocation feature
➤ To physically relocate (swap) Station A and B
Important! Make sure that the location that the phone is moving to is already
vacant.
If you are moving a telephone (for example, Station A) to a new location
that already has a telephone connected to it (for example, Station B),
disconnect Station B from its telephone jack before you disconnect
Station A.
You cannot configure the moving station (Station A) to an already
occupied station (Station B).
1. From the
Administrator station,
press a [DN] +
to turn on the
Auto Station
Relocation feature.
You hear a confirmation tone indicating the Station
Relocation feature is on. If you hear a busy tone, the
Station Relocation feature is already turned on, or you
did not dial from the Administrator station.
2. Press
6SNU.
1. Verify that the
telephone jack for the
new location does not
have a telephone
connected.
2. Unplug the telephone
that is moving from
its wall jack at the old
location.