Filter
Top Products
Setting System Parameters
Speed Dial—Advanced Features
28 Strata DK System Administrator Guide 5/00
Speed Dial Pause and Flash Storage
Some Speed Dial numbers may require a pause (long or regular) or hookflash be
included (e.g., tone delay requires a pause at the beginning of a Speed Dial number).
Speed Dial Number Linking
You can link any of the Station Speed Dial numbers to System Speed Dial codes or to
any of the optional buttons associated with these codes. The Administrator station can
be used to link System Speed Dial Codes. This enables lengthy digit strings to be
stored under one Station Speed Dial button or code.
The number directly stored in the System Speed Dial number dials out first, then the
number linked to it. Typically, a company’s special carrier access telephone numbers
are stored as part of the digit string.
➤ To link system/system speed dial numbers
Hookflash Regular Pause Long Pause
The )ODVK button stores a flash
signal only if 6SG'LDO3DXVH
is programmed as a flexible
button on the telephone. The
flash signal is 0.5 or 2 seconds
long (set in system
programming) and is displayed
on the LCD as “)”.
Press )ODVK
...or enter the hookflash dial
code (&QI7UQ + ).
The pause is either 1.5 or 3
seconds (set in system
programming). The LCD
displays “3”.
Press 6SG'LDO3DXVH
...or if 6SG'LDO3DXVH is not
on the telephone, press )ODVK
to store a pause.
Ten-second pause, which can
be entered anywhere in the
Speed Dial number. The LCD
displays “/”.
Press 6SG'LDO/QJ3DXVH.
1. Press 5HGLDO.
2. Press
6'
...or 6SHHG'LDO + a
System Speed Dial
Access Code.
See Table 8 on Page 42 for Station Speed Dial Access
Codes.
3. Press
6SHHG'LDO.