Filter
Top Products
Setting System Parameters
Emergency 911 Calls
8 Strata DK System Administrator Guide 5/00
Emergency Calling from the Attendant Console
The PC attendant console and the DK attendant console can be programmed make
E911 calls two different ways, by using either CO line buttons or the INT button to
initiate the call. The procedure and results are described below:
From the attendant console, the Attendant can press:
♦ a CO /LQH, 3RROHG/LQH or CAMA CO button and dial 911. When 911 is dialed
from an outgoing line button, the outgoing line button drops and the CAMA trunk
is seized on the INT button. 911 plus the Attendant Console CESID is sent out the
CAMA trunk.
♦ ...or the ,17 or [PDN] button and dial 911. When 911 is dialed, the ,17 or [PDN]
releases from the internal connection and seizes the CAMA trunk. 911 plus the
Attendant Console CESID is sent out the CAMA trunk.
If the system does not use LCR or if the station does
not have a CO Line, Pooled Line or CAMA CO
buttons – when a
is dialed as an access code, the
station seizes a “dial 9” CO line on its [PDN]. When
is entered, the 911 call will be sent one of two
ways:
♦ If the station does not have another idle [PDN] or
CAMA CO button, the 911 call will be sent out the
normal CO line in the dial 9 line group without the
station’s CESID.
♦ If the telephone has another [PDN] or CAMA CO
button, and it is idle, the first PDN will drop and
the second [PDN] or CAMA CO button will be
connected to the CAMA trunk. 911 plus the
station’s CESID will be sent out the CAMA trunk.