Filter
Top Products
English
23
Answering machine
During playback, you can:
On the handset:.
9.3 Remote Operation
The answering machine can be operated remotely using a touch-tone phone (DTMF tone selection
system). The remote control is menu operated.
To enter the remote operation
• Press the skip back key once to go to the beginning of the current message.
• Press the skip back key twice to go to the previous message.
• Press the stop key to stop the playback.
• Press the delete key to erase the current message.
• Press the play/pause key to interrupt the playback. Press the play/pause key
again to restart playback.
• Press the skip forward key to go to the next message.
After you have listened to all messages, the internal voice will ask you to
delete all the messages.
• Press the delete key to confirm. After pressing delete, the internal voice
confirms that all the messages have been deleted.
• Press the stop key to skip.
1 Enter the menu.
2 Select “PLAY MESSAGES” and confirm.
3 The amount of new messages will be show, press the down key to see all
messages (new and old messages).
4 Press the OK key to play a message.
5 After the play back, the internal voice will ask to delete all messages by
pressing the delete key.
1 Call your machine.
The answering machine picks up the line, you hear the outgoing message and
a beep.
2
After the beep, press the ‘ ’ key long. The unit will ask to enter the VIP code.
3 Slowly dial the VIP code (default = ‘123’).
• If the VIP code is incorrect the unit will confirm and ask you to re-enter.
4 If the VIP code is correct and the unit has new messages, it will start to
pronounce the amount of new messages and also play them. When all
messages are played, the unit will ask you to press ‘5’ to delete current
played messages, or ‘1’ to hear main menu.
1 • If the unit doesn’t have any new messages it will say so and ask you to
press ‘1’ for main menu.
4
GHI
6
MNO
5
JKL
4
GHI
6
MNO
5
JKL