Filter
Top Products
10
Using the telephone
3.12 Pause key
When dialing a number you can add a pause between two digits:
3.13 Locating a handset (Paging function)
3.14 Redial memory
You can redial up to 10 of the last numbers called. If you have stored a name in the phonebook to
go with the number, the name will be displayed instead.
3.15 Using the alphanumerical keypad
With your telephone, you can also enter alphanumeric characters. This is useful for entering a
name into the phonebook, giving a name to the handset, ...
To select a letter, press the corresponding key as many times as necessary.
For example, to select an ‘A’, press ‘2’ once. To select a ‘B’, press ‘2’ twice and so on.
To select ‘A’ and then ‘B’ consecutively, press ‘2’ once, wait until the cursor moves on to the next
character, then press ‘2’ twice.
During entering text, the available character under each key appears below on the display.
The keypad characters are as follows:
Key First Second Third Fourth Fifth
press press press press press
1space - 1
2ABC2
3D E F 3
4GHI 4
5J K L 5
6MNO6
7P Q R S 7
8TUV8
9WXYZ9
1 Press the redial/pause key for 2 seconds.
1 Press the paging key on the base.
All handsets registered with the base will ring.
2 Press any key on the handset to stop the ringing.
1 Press the redial key.
2 Select a number. If the number is in the phonebook, the name will be
shown.
When the name is displayed, you can toggle between the name and the number
by pressing the OK key!
3 Press the off-hook key to start the call.
4 Press the on-hook key to return to standby.
Press ‘1’ to select a space.
Press the delete key to delete a character.
4
GHI
6
MNO
5
JKL