Filter
Top Products
18
Managing multiple handsets
If your handset is another model
After starting the registration procedure on the base, refer to the handset manual to find out how
to register the handset. The handset must be GAP compatible.
The icon ‘ ’ and the text “NOT REG” flashes on the display when the handset is not associated
with the base.
When a handset is associated with a base, it is attributed a handset number by the base. It is this
number that is displayed on the handset after the name and must be used for internal calls.
8.2 Removing a handset
This procedure needs to be carried out on a different handset then the one you want to remove.
8.3 Setting up a handset on another base
If you want to use a Butler E450 handset with a base of another model. The base must be GAP
compatible.
8.4 Selecting a base
You can switch your handset between bases. The handsets can be registered up to 4 bases
simultaneously. When selecting the base, the current selected base is indicated by a blinking base
number. If you select “AUTO” the handset will automatically search for another base when you
are out of range. The handset must first be registered with each base individually.
DECT GAP Profile only guarantees that basic calling-functions will work correctly
between different brands/types. There’s a possibility that certain services (like
CLIP) will not work correctly.
1 Enter the menu.
2 Select “SETUP” and confirm.
3 Select “DEL HANDSET” and confirm.
4 Enter the Base PIN code (0000 by default) and confirm.
5 Select the handset to be removed and confirm.
1 Put the base in registration mode, refer to the base manual.
2 Enter the menu.
3 Select “REGISTER” and confirm.
4 Select “REG BASE” and confirm.
5 Enter the number of the base to be associated with the handset and confirm.
6 Enter the Base PIN code and confirm.
The handset will start searching for the DECT base. If the handset has located
the base, it will display the base identification number.
7 Confirm or stop.
1 Enter the menu.
2 Select “REGISTER” and confirm.
3 Select “SELECT BASE” and confirm.
4 Select a base or select “AUTO” and confirm.
4
GHI
6
MNO
5
JKL
4
GHI
6
MNO
5
JKL
4
GHI
6
MNO
5
JKL