Filter
Top Products
Topcom Butler 5500
112 Topcom Butler 5500
9.8.2 To set and select the sending SMS Centre number
• From the standby screen, press SMS to open the SMS menu.
• Scroll to Settings and press OK.
•Press OK to open Service Centres menu.
• Scroll to Sending Centres and select OK.
• Select one of the 2 centre numbers to be changed and press OK.
• The current stored number will be shown. Press Clear and enter the new number.
•Press Save to store the number.
•Press Back to go to the Service Centres menu.
•Press Set Send Centre to choose the sending centre number 1 or 2 and press OK.
This centre number will be used to send a message!
9.9 CHANGING TEMPLATES
• From the standby screen, press SMS to open the SMS menu. Scroll down to Templates and press OK.
• Scroll to the template you want and press OK.
• Edit Template is highlighted. Press OK. Use CLEAR to delete characters or use the navigator to move the cursor.
Use the keypad to enter the new template then press SAVE. The new template replaces the old one.
9.9.1 Delete template
• From the standby screen, press SMS to open the SMS menu.
• Scroll down to Templates and press OK. Scroll to the template you want and press OK.
Scroll to Delete Template. Press OK.
10 ADDITIONAL HANDSETS AND BASES
You can subscribe up to 5 handsets on a Butler 5500 base. Each handset can register to 4 base stations and the user
can select which base he wants to use.
10.1 ADDING A NEW HANDSET
!! Only needed when you have deregistered a handset or when you bought a new one !!
First put the base into registration mode:
• Press and hold the paging button on the base until you hear two beeps.
• The LED will start to blink on the base for 90 seconds. During that time the base is ready to register a handset.
On the handset:
• Select Menu to open the menu.
• Select Registration with the navigator and press OK.
• Select Register Handset with the navigator and press OK.
• Select the number of the base to be associated with the handset (1 to 4). Confirm by pressing OK.
• Enter the system PIN (0000 by default) and confirm with OK. A series of numbers appears on the screen,
representing the base ID. Confirm with 0K. Your handset is registered.
10.2 REMOVING A HANDSET
This procedure needs to be carried out on a different handset from the one you want to uninstall.
• Select Menu by pressing the left menu key.
• Select Registration with the navigator and press OK.
• Select De-register with the navigator and press OK. Enter the system PIN (0000 by default) and press OK.
• Select the handset to uninstall with the navigator and press OK.
10.3 SELECT A BASE
You can switch your Butler 5500 handset between bases. You can also set it to automatically base select with the
strongest signal. The handset must first be registered with each base individually.