Filter
Top Products
English
3
Getting started
2.3 Twin/Triple/Quattro version
If you have purchased a Twin, Triple or Quattro version:
1 Plug one end of the adaptor into the outlet and the other end into the adapter jack on the bottom
of the charger.
2 Insert the battries inside the handset.
3 Charge the handset for at least 20 hours.
2.4 Installing the Skype software
To be able to make calls over internet, you need a broadband connection and Skype installed on
your computer. Download Skype for free from http://www.skype.com/go/getskype. Run the setup
and follow the installation procedure.
2.5 Installing the phone software
To be able to use the Butler 4872 phone together with Skype, you need to install the phone
software on your computer. This software will be the bridge between Skype and the phone.
Minimum system requirements:
• PC running under Windows XP or 2000;
• 32 MB free memory;
• 20 MB free hard disk space;
• Internet connection with 56kbps or higher.
1 Install the software from the CD included with the phone.
2 Insert the CD when the PC is on. If the program doesn’t run automatically, click on the Start
icon and select “Run”. Enter D:\CD_Start.exe (if D in not your CD-ROM drive, enter the
appropriate letter).
3 Click “Install Software”.
The installation wizard will guide you through the process.
Before you use the telephone for the first time, you must first make sure the battery
is charged for 20 hours. If you do not do this, the telephone will not work optimally.
For the latest version of the software please look at our website:
http://www.topcom.net/support/downloads.php